The process is actually very simple but does require some explanation. Here we discuss, in the main, Port Forwarding. Safety concerns – this is all safe… right?įirstly we need to cover the basic setup of an IP camera.Note that while this method is still used a great deal it is no longer recommended as the best option for remote access. Most people will connect their IP camera to a standard Ethernet router alongside other computers and network devices. There are no restrictions on outgoing data unless you set them within your router.Īll devices will then gain access to the internet through the router. However the same is not true in the opposite direction. Routers contain a firewall which prevents anyone using the internet from accessing your local network. This keeps your computer and local devices safe from attack by hackers but also means that you can’t connect to your camera. Port forwarding (sometimes called port mapping or virtual servers) is the method which tells your router that you want to allow access from the internet to a device on your network without allowing access to other devices. Internal IP address of your router and subnet mask In order to set up port forwarding you will need to gather some network information, namely the IP address of your camera, internal IP address of your router, external IP address of your router and the port number to be used. To access this information in Windows XP, go to the Start menu and click on “Run”. In the box that opens, enter “cmd” and click “OK”. In Windows Vista and Windows 7, click the Windows icon and in the search box enter “cmd” and press enter. The Windows command window should now appear. #Scw networker pro camera in another subnet windows The computer will then churn out your network information for your computer. ![]() If you are using a wireless connection between your computer and router look for “Ethernet adaptor local Wireless connection” if you are connected by a wire then look for “Ethernet adaptor local area connection”. Once you have the right area, look for the default gateway. #Scw networker pro camera in another subnet windows.#Scw networker pro camera in another subnet how to.I would therefore prefer to administer the NVR and cameras via the iVMS-4200 software and/or using a browser. Although I could do this currently, as the NVR is in my home office, eventually, it will be positioned in a storage room I use for other network equipment where it would be impossible to run a HDMI cable to a monitor. I'm not currently using a HDMI cable in the NVR to allow me to use a monitor to access it (I believe this is called "Live View"). I assume this is because 254 is not the same subnet as 0, which is used by my LAN.Īny thoughts on the easiest way to access the camera's configuration page so I can check/update the firmware? Do I really need to mess about changing my PC network settings to use a different subnet so this will be on the same subnet as the camera (192.168.254)? ![]() When I type 192.168.254.2 into a web browser, not surprisingly, it times out and is unable to access that device. If I could do this through the iVMS-4200 software that would be even easier, but I don't believe it can. 192.168.254.2 into a web browser to get to the cameras remote configuration page. From what I have Googled, to do this I need to type the IP address of the camera i.e. I want to check what firmware is installed on the camera and possibly update it if it isn't the latest.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |